Soybean Milk Powder Spray Dryer
Basic Info
Model No.: LPG
Product Description
Features of Spray Drying Machine
1. LPG Centrifugal Spray Dryer with fast drying speed can constantly evaporate 95%-98% moisture. The drying time is about 5 seconds to 15 seconds. This Drying equipment is especially suitable for thermosensitive substance.
2. This Spray Dryer has excellent uniformity, liquidity and solubility as well as high purity.
3. This spray drying machine has simple production process and easy operation. After drying, it does not need to grind and screen, which can reduce production procedure and enhance the purity.
Soybean Milk Powder spray dryer machine Product Introduction
Spray drying is the most widely used process in the liquid process forming and drying industry. It is most suitable for the production of powdery, granular solid products from solutions, emulsions, suspensions and pasty liquid raw materials. Therefore, spray drying is a very desirable process when the finished product particle size distribution, residual moisture content, bulk density, and particle shape must meet exacting standards.
Soybean Milk Powder Spray Dryer Working principle
Air is filtered and heated into the air distributor at the top of the dryer. The hot air spirally enters the drying chamber. The feed solution is passed through the high-speed centrifugal atomizer at the top of the tower body, and (rotated) is sprayed into very fine mist-like liquid beads, which can be dried in a short time in the cocurrent contact with hot air. The finished product is continuously output from the bottom of the drying tower and the cyclone separator, and the exhaust gas is exhausted by the fan.
High-Speed Soybean Milk Powder Spray Dryer Adaptable materials
Chemical industry: Sodium fluoride (potassium), basic dye pigments, dye intermediates, compound fertilizers, formaldehyde silicic acid, catalysts, sulfuric acid agents, amino acids, white carbon, etc.
Plastic resin: AB, ABS emulsion, urea-formaldehyde resin, phenolic resin, adhesive (urea) formaldehyde resin, polyethylene, polyvinyl chloride and so on.
Food Industry: Fat-enriched milk powder, Taro, cocoa powder, milk replacer, blood powder, egg white (yellow), etc.
Food and plants: oats, chicken juice, coffee, instant tea, spices, protein, soybeans, peanut protein, hydrolysates, etc.
Sugars: Corn syrup, corn starch, glucose, pectin, maltose, potassium sorbate, etc.
Ceramics: Alumina, tile materials, magnesium oxide, talcum powder, etc.
Ordering Information
◎ material liquid name, physical properties: solid content (or water content), viscosity, surface tension, PH value.
◎ Powder capacity after drying, allowable residual water content, particle size, maximum allowable temperature.
◎ Production, daily opening hours.
◎ Available energy: steam pressure available, capacity, available for coal, oil, gas.
◎ Control requirements: whether the inlet and outlet temperatures need to be controlled.
◎Powder collection requirements: Whether or not to install a bag trap, the environment requires exhaust emissions.
◎ other special requirements.
Technical specifications
Model / Item / Parameter | 5 | 25 | 50 | 150 | 200-2000 |
Inlet temperature | 140-350 Automatic Control | ||||
output temperature | 80-90 | ||||
Maximum moisture evaporation (kg/h) | 5 | 25 | 50 | 150 | 200-2000 |
Centrifugal spray head drive form | Compressed air drive | Mechanical transmission | |||
Maximum speed (rpm) | 25000 | 18000 | 18000 | 15000 | 8000-15000 |
Spray disk diameter (mm) | 50 | 120 | 120 | 150 | 180-240 |
Heat source | Electricity | Steam + electricity | Steam + Electric, Fuel, Gas, Hot Air Furnace | ||
Electric heating maximum power (kw) | 9 | 36 | 72 | 99 | |
Dimensions (length × width × height) (m) | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.5×3.5×4.8 | 5.5×4×7 | According to the actual situation |
Dry powder recovery (%) | ≥95 |
Note: The amount of water evaporation is related to the characteristics of the material and the hot air inlet and outlet temperatures. When the outlet temperature is 90 o C, the water evaporation curve is shown in the above figure (for selection reference). As the product is continuously updated, the relevant parameters are changed without prior notice.
Technical specifications
size | A | B | C | D | E1 | E2 | F | G | H | I |
LPG-25 | 1290 | 3410 | 4260 | 1800 | 1200 | 1200 | 1,000 | 1700 | 1300 | 1550 |
LPG-50 | 1730 | 4245 | 5100 | 2133 | 1640 | 1640 | 1250 | 1750 | 1800 | 1600 |
LPG-100 | 2500 | 5300 | 6000 | 2560 | 2100 | 2100 | 1750 | 1930 | 2600 | 1780 |
LPG-150 | 2800 | 6000 | 7000 | 2860 | 2180 | 2180 | 1970 | 2080 | 3050 | 1960 |
LPG-200 | 2800 | 6600 | 7300 | 3200 | 2300 | 2300 | 2210 | 2250 | 3050 | 2100 |
LPG-300 | 2800 | 8000 | 8700 | 3700 | 2800 | 2800 | 2520 | 2400 | 3040 | 2250 |
Product Categories : Drying Series > Spray Dryer