Silica Sand Three Cylinder Rotary Drum Dryer
Basic Info
Model No.: Φ3.2×7.0m
Product Description
Silica Sand Three Cylinder Rotary Drum Dryer
Introduction of Three Cylinder Dryer
Three Drum Dryer is used for drying sand, yellow sand, slag, clay and other raw materials, widely used in building materials, chemical industry, foundry industry, etc. The Small Sand Dryer uses a variety of fuels such as coal, oil and gas. Three Cylinder Rotary Dryer adopts the latest European energy saving technology, clamp type structure. Internal cylinder, middle cylinder and outer cylinder form a since the insulation structure. Special thermal design idea and the emlimination of wind tunnel heat loss increase the heat exchange area and unit volume evaporation intensity.
Features of Three Cylinder Rotary Dryer
1. The dryer drum is made of wear resistant manganese plate, long service life.
2. High thermal efficiency.
3. Fuel adopts white coal, bituminous coal, coal gangue, oil, steam. Raw material requires <40 mm bulk, aggregate, powder material.
4. No air leakage phenomenon.
5. Outer barrel temperature <60 ℃, the exhaust gas temperature < 120 ℃, dust removal equipment could serve 2 times longer.
Technical Parameters of Three Cylinder Rotary Drum Dryer
Item/Unit/Model: Φ3.2×7.0m
Diameter of outer cylinder: 3.2m
Length of outer cylinder: 7m
Cylinder volume: 52.678m³
Rotating speed of cylinder: 4-10rpm
Initial moisture of slag: 10-12%
Final moisture of slag: 1%
Initial moisture of yellow ground: 8-10%
Final moisture of yellow ground: 0.5-1%
Highest intake air temperature: 700-750℃
Production capacity: Yellow sand 45-50t/h, Slag 35-40t/h
Motor type: Y2-160m-4
Motor power: 7.5×4kw
Reducer type: XWD6-23-7.5W
Velocity ratio of reducer: 29
Delivery Site of Three Cylinder Rotary Drum Dryer
Product Categories : Drying Equipment > Three Drum Dryer